13 Products
The HT Thru Tie Rod is manufactured from high grade steel and features a special 'high speed' thread to reduce the time and cost of erecting and dismantling the HT Thru Tie assembly. Tie Rods need…
Wing Nut is designed to spin freely on the 'high speed' thread by hand and may be tightened using either an AF spanner or a length of bar. The unbalanced, single wing design resists movement under…
Rod Couplers can be used to join HT Thru Ties where greater lengths are required (or for economical use of cut lengths). The Rod Coupler remains buried in the concrete. The HT Thru Tie Rod MUST be…
The HT Thru Tie Rod is manufactured from high grade steel and features a special 'high speed' thread to reduce the time and cost of erecting and dismantling the HT Thru Tie assembly. Tie Rods need…
Wing Nut is designed to spin freely on the 'high speed' thread by hand and may be tightened using either an AF spanner or a length of bar. The unbalanced, single wing design resists movement under…
Rod Couplers can be used to join HT Thru Ties where greater lengths are required (or for economical use of cut lengths). The Rod Coupler remains buried in the concrete. The HT Thru Tie Rod MUST be…
The HT Thru Tie Rod is manufactured from high grade steel and features a special 'high speed' thread to reduce the time and cost of erecting and dismantling the HT Thru Tie assembly. Tie Rods need…
Hex Couplers can be used to join metric threaded steel rods where lengths are required (or for economical use of cut lengths). The Hex Coupler remains buried in the concrete. The Hex nut MUST be…
Removable after use. These 'push- fit' Polythene Cones fit on the ends of the PVC Tube Spacer. Available in two sizes to suit the 24.5 and 27.0mm OD spacer tube. The plastic cone leaves a clean-edge…
The expendable PVC Tube Spacer is available in 2 diameters 24.5 OD to suit the 15/17mm Thru Tie Rod. 27.0 OD to suit the 19/21mm Thru Tie Rod. 3m lengths - 10 lengths per pack (30m)
Powered by